________________________________________________________________ HP Model 45 Plus - Multiprotocol X.25 Switching Node Technical Datasheet Product Number J2000B/J2001B ________________________________________________________________ The HP Model 45 Plus is a new generation of high-speed X.25 switching node and multiprotocol PAD. It connects HP and non-HP systems together as well as concentrates devices with different protocols. The HP Model 45 Plus can operate as a standalone switch, also multiple HP Model 45s can be interconnected to form a small network. It can also provide very cost effective multiprotocol PAD access to large public (Telenet, Transpac, PSS, Datex-P,..) or existing private X.25 packet networks. ..pictureC:\m45r3\data1.gal,65535,47637,1,78,23, .PA ________________________________________________________________ Features and Benefits . Simple entry level solution for high-speed multivendor networking. . Reduced communication and equipment costs (concentration of multiple X.25, SNA/SDLC, asynchronous lines, on one or more X.25 access lines). . Strong IBM SNA/SDLC features allowing to integrate HP 3000/9000 systems within IBM Mainframe environment. . Flexible connection to public X.25 data networks (Telenet, Transpac, PSS, Datex-P, etc...) or private X.25 networks, with alternate leased line back-up features. . State-of-the art connectivity with a wide choice of interfaces like RS-232/V.24, V.35, X.21 and RS-449 standards for high-speed networking. . High performance multiprotocol links up to 1.5 Mbps (T1 speed) with up to 2500 packets per second on 30 ports, . Full satellite links performance with packet size configurable up to 1024 bytes. . High Reliability obtained with Surface Mounted Technology (SMT). Estimated Mean-Time-Between-Failure : 35 years. . Alternate leased line back-up over public or private data networks. . Managed by HP OpenView Switch/PAD Manager, allowing to manage HP DTCs, HP Hubs and Bridges, HP systems, HP2335A PADs and HP Model 45 Pluses from the SAME HP OpenView network management platform. . Customer installable and rackmountable in standard HP 19" racks. . Complete compatibility between the current 4-port Line Processor card and the NEW 6-port Advanced Line Processor card. The NEW 6-port ALP card can be installed on the previous HP Model 45 platforms (J200XA), at the condition that a 4 ports LP card remains plugged in the J200XA. . CPL Availability : October 1st, 1992. ________________________________________________________________ Functional Description The HP Model 45 Plus is a combined X.25 switching node and multiprotocol PAD supporting X.25, SNA/SDLC and asynchronous protocols. It consists of one or more 6 port multiprotocol Advanced Line Processor (ALP) cards. Individual ports on a ALP card can be configured for any of the supported protocols (X.25, SNA/SDLC, and asynchronous). The Model 45 Plus can operate as a standalone, intersystem and terminal switch and as a multiprotocol line concentrator to a public network. Configuration, control and monitoring functions can be performed, locally or remotely, via an ANSI terminal or an attached PC monitor and keyboard. It can also be interconnected with other HP Model 45 Plus's to form a small network linking the systems and terminals at distributed customer sites. ________________________________________________________________ X.25 Switching & Routing The HP Model 45 Plus provides an integral X.25 communication interface and the following packet switching capabilities : . Static Routing Table with flexible X.121 adress scheme based on Called Address (usual) and/or Calling Address (for security) and/or Call User Data (extended addressing) with call looping prevention, . Hunt Group facility to associate up to 8 ports in a group, 4 algorithms Round Robin providing load levelling, Least LCN used with throughput, Alternate Route on Line Busy, Alternate Route on Line Failure, . Powerful address translation gateway allowing multiple operations (extract from original called/calling/cud, remove, pass, add digits) for the called add, user data and pass/ remove for the calling address and facilities fields. ______________________________________________________________ SNA/SDLC PAD The HP Model 45 Plus features an integral SNA/SDLC PAD which enables communication between remote IBM SNA Control Units and an IBM SNA Mainframe over an X.25 public or private network. Configurable PAD types include the TPAD and the HPAD for any port of an Advanced Line Processor card. The logical channel connection between an HPAD and TPAD can be either a Permanent Virtual Circuit (PVC) or a Switched Virtual Circuit (SVC). The SNA/SDLC Terminal PAD, or SNA TPAD, acts as a gateway between SNA users over an X.25 network. It offers communication between remote SNA Control Units (IBM, HP 3000 or HP 9000) and an IBM host or other mainframe computers with the NPSI software or connected to the X.25 network through an SNA HPAD. Both the SNA TPAD and the SNA HPAD perform flow control, automatic call setup and packetizing of SNA information frames. The SNA TPAD & HPAD perform local polling with the attached SNA device, thus keeping network traffic to a minimum. The HPAD supports up to 16 SNA TPAD connections and each TPAD port can support one Control Unit. .PA ________________________________________________________________ Asynchronous PAD The HP Model 45 Plus features an integral asynchronous PAD which facilitates transparent communication between remote terminals or printers to one or more central computers over an X.25 network. Any or all of the ports on the ALP card can be configured as an asynchronous PAD port. For price reasons, it is recommended to use an HP2335A Asynchronous PAD if there are more than 3 asynchronous connections. ________________________________________________________________ Network Management The HP Model 45 Plus is fully managed by HP OpenView Switch/PAD Manager, allowing to manage the HP Model 45 Plus from the same HP OpenView network management platform than HP DTCs, HP Hubs and Bridges, HP systems and HP2335A Asynchronous PADs. The following features are provided : . Configuration with local console or remotely from any HP Model 45 Plus console or PAD user or HP OpenView Switch/PAD manager including remote node reboot, software configuration update, . Local/ Remote password security, . Real time Alarms/Events collecting (including heartbeat) to an HP Model 45 Plus designed as collecting node or to HP OpenView Switch/PAD manager, . Alarm Reporting on X.121 address, serial port, parallel port, . ASCII file configuration report, . Packet level trace (available in remote), . Modem signals for any port (available in remote), . Line Status, performance display, connection display, statistics at line processor and port level (available in remote), File transfer facility between HP Model 45 Plus's. ________________________________________________________________ Functional Specifications HP Model 45 Plus J2000B (Max. 18 ports) : . 6-18 synchronous/asynchronous ports. . Power : 50 W typical; 85 W maximum with 110/220 V supply; . Input Voltage : Auto-ranging power supply 90-132 V lower range over 47 to 63 Hz 198-264V upper range over 47 to 63 Hz . System Dimensions : 15.0 in.wide x 15.6 in.deep x 4.0 in.high (38.1 cm * 39.7 cm * 10.2 cm). . System weight : 9.23 Kg (Box + ALP card - J2000B) 0.98 Kg (6-port MAP cable - J2030A) 0.23 Kg (ALP card alone - J2004B) .PA HP Model 45 Plus J2001B (Max. 30 ports) : . 6-30 synchronous/asynchronous ports. . Power : 52 W typical; 100 W maximum with 110/220V supply; . Input Voltage : Auto-ranging power supply 90-132 V lower range over 47 to 63 Hz 198-264V upper range over 47 to 63 Hz . System Dimensions : 17.3 in.wide * 16.1 in.deep * 6.6 in.high (44 cm * 41 cm * 17 cm) . System weight : 11.53 Kg (Box + ALP card - J2000B) 0.98 Kg (6-port MAP cable - J2030A) 0.23 Kg (ALP card alone - J2004B) ________________________________________________________________ General Specifications . Up to 6 configurable ports per ALP card. . RS-232-C (CCITT V.24/V.28), V.35, X.21 & RS-449 interfaces . DTE/DCE configurable at the port level . Maximum aggregate throughput = 512kbps per ALP card . Maximum supported line speeds: RS232 - up to 19.2 kb/s V35 - up to 64 kb/s X21 - up to 512 kb/s RS449 - up to 1.5 Mb/s . Maximum throughput of 1.5 Mbps in monoport version . Supports switched virtual circuits (SVC) and permanent virtual circuits (PVC). . Supports up to 2048 simultaneous VC's (up to 300 PVC's) . Performance : up to 2500 in/out packets/s (128 bytes) up to 100 call setup per second . X.25, SNA/SDLC, Asynchronous protocols defined port per port . All software on one floppy disk for easy software update . Transfer file function . Menu driven User Interface . Dynamic configuration changes . Rackmountable with HP standard kit . Customer Installable ________________________________________________________________ X.25 Interface specifications Level 1 : . RS-232/V.24 interface . V.35 interface . X.21 interface . RS-449 interface . Single port (0 or 1) can provide clock up to 1.5 Mbit . All port may be configured as DTE or DCE without opening the HP Model 45 Plus, Level 2 : . CCITT 1988 conformance . LAPB protocol . Mod 8 or 128, window 1 - 127 . Logical DCE or DTE . Frame size up to 10xx X 8 bits Level 3 : . Packet size up to 1024 bytes (128,256,..1024) . Up to 2048 simultaneous active virtual circuits, . SVC or PVC (LCN from 1 to 4095), . X.25 Facilities Supported : - Transparent to the User Facilities Field. - Complete facility Field can be changed when acting as a gateway (address translation facility). ________________________________________________________________ SNA/SDLC Interface specifications Level 1 . IBM SDLC full-duplex mode . Throughput Class up to 64 k for SDLC frames up to 4Kbytes . Support NRZ or NRZI encoding . Point-to-Point operation for TPAD connections Level 2 . IBM SDLC half-duplex mode . SNA Permanent Virtual Circuits support (up to 300) . Configurable SDLC station address . Configurable SDLC frame size up to 4105 bytes. . QLLC protocol (local polling), support HPAD/TPAD connections, NPSI/TPAD and HPAD/QLLC connections . Autocall on TPAD or HPAD with retry timer . Host-to-host with NPAD mode . Transparent mode with XPAD mode . SNA/SDLC ports can operate as DTE or DCE (provides clocking). ________________________________________________________________ Asynchronous Interface specifications . Implements CCITT X.3 parameters (18 standard parameters) . Implements CCITT X.28 PAD services signal plus one extra command . Implements CCITT X.29 including optional X.29 reselection . M-bit sending configurable . Throughput Class from 50bps to 38.4Kbps, autobaud facility from 1200 to 19.2 Kpbs. . Configurable window (up to 127) and packet size (up to 1024 bytes) . Local login password security with logout timer . Predefined profiles . Profile defined per port or per subscriber . Abbreviated addressing for Async PAD users. . Configurable welcome message . Help commands . Supports character mode and VPLUS applications for back-to-back use. ________________________________________________________________ Safety Compliance # UL 1950 # EN 60950 # CSA C22.2 No 950 .PA ________________________________________________________________ EMC : Electromagnetic Compatibility # FCC Part 15, Subpart J, Class B # VCCI Class 2 # EN 55022 Class B # CICSPR22 Class B # IEC 801.2/3/4 ________________________________________________________________ Environmental Characteristics . Temperature : Operating : 40 to 104xF (5xC to 40xC) - J2000B (18 ports) 40 to 104xF (5xC to 40xC) - J2001B (30 ports) . Non-operating : -40 to 158xF (-40 to 70xC) . Altitude : Operating : 0 ft to 15,000 ft (0 to 4,570 meters) Non-operating : 0 ft to 50,000 ft (0 to 15,250 meters) . Relative Humidity : Operating : 15 % to 95 % RH (non-condensing) - J2000B Non-operating : 15 % to 80 % RH (non-condensing ) - J2001B ________________________________________________________________ Certified Public Networks Country | Public Data Network | Certified : USA | US SPRINT/TELENET | BT NORTH AM. TYMNET UK | PSS GERMANY | DATEX-P SPAIN | IBERPAC ITALY | ITAPAC AUSTRIA | DATEX-P HOLLAND | DATANET1 BELGIUM | DCS SWEDEN | DATAPAK FINLAND | DATAPAK NORWAY | DATAPAK LUXEMBOURG | LUXPAC TAIWAN | PACNET Self-Certification : FRANCE | TRANSPAC SWITZERLAND| TELEPAC PORTUGAL | TELEPAC CANADA | DATAPAC AUSTRALIA | AUSTPAC DENMARK | DATAPAK SINGAPORE | TELEPAC SOUTH-KOREA| DACOM-NET NEW ZEALAND| PACNET HONG-KONG | INTELPAK Currently in progress : JAPAN | VENUS-P USA | DDN MEXICO | TELEPAC BRAZIL | RENPAC HUNGARY | PLEASE SOUTH-AFRIC| SAPONET MALAYSIA | MAYPAC CHINA | CHINAPAC * Please check with your local HP organization to confirm latest approval information. ________________________________________________________________ Ordering Information HP MODEL 45 PLUS - 18 PORTS VERSION Product Number Description ______________________________________________________ HP J2000B 6 Port Multiprotocol switch (includes one multiprotocol ALP card, X.25, Async, SNA/SDLC software and manuals) HP J2004B Additional 6 Port multiprotocol ALP card (X.25, Async, SNA/SDLC). Maximum = 2. HP J2007B Monitor/Keyboard Package (includes VGA Monitor & Keyboard) - Optional HP J2030A RS-232 MAP cable (6 RS232 ports) HP J2031A V.35 MAP cable (2 V.35/4 RS232 ports) HP J2032A X.21 MAP cable (2 X.21/4 RS232 ports) HP J2033A RS-449 MAP cable (2 RS449/4 RS232 ports) Note 1: when ordering J2000B or J2001B, you must also order one MAP cable, either J2030A, J2031A, J2032A or J2033A. HP MODEL 45 PLUS - 30 PORTS VERSION Product Number Description ______________________________________________________ HP J2001B 6 Port Multiprotocol switch (includes one multiprotocol ALP card, X.25, Async, SNA/SDLC software and manuals) HP J2004B Additional 6 Port multiprotocol ALP card (X.25, Async, SNA/SDLC). Maximum = 4. HP J2007B Monitor/Keyboard Package (includes VGA Monitor & Keyboard) - Optional HP J2030A RS-232 MAP cable (6 RS232 ports) HP J2031A V.35 MAP cable (2 V.35/4 RS232 ports) HP J2032A X.21 MAP cable (2 X.21/4 RS232 ports) HP J2033A RS-449 MAP cable (2 RS449/4 RS232 ports) CONVERSION KIT FROM HP MODEL 45 TO HP MODEL 45 PLUS HP J2005B Conversion kit from HP Model 45 to HP Model 45 Plus (includes one multiprotocol ALP card + software + manuals). Note 1: when ordering J2005B, you must also order one MAP cable, either J2030A, J2031A, J2032A or J2033A. Note 2: This J2005B conversion kit can be installed on the previous HP Model 45 platforms (J200XA) at the condition that a 4 port LP card remains plugged in the J200XA. SUPPORT SERVICES J2000B/J2001B + 16A Network Startup for HP Model 45 Plus J2000B/J2001B + 16B NetAssure for HP Model 45 Plus J2000B/J2001B + 02A HP Successline /Priority (9h/5 days)